Single-girder bridge crane JMD 5 t / 6 m

PROJECT NAME: Single-girder bridge crane JMD 5 t / 6 m

 

INVESTOR: IRT Hidro Ltd.

 

LOCATION: WR Vukovar

 

YEAR OF PRODUCTION: 2017.

 

TECHNICAL CHARACTERISTICS:

  • maximum crane capacity: 5 t
  • bridge span: 6 m
  • lifting height: 9,3 m
  • load lifting speed (frequency reg.): 3,3/0,3 m/min
  • hoist travel speed: 10 m/min
  • bridge travel speed: 9 m/min

 

TECHNICAL DESCRIPTION:

For the needs of the investor, the company IRT Hidro Ltd., a project of a single-girder bridge crane was made, and it was manufactured and installed. The maximum load capacity of the crane is 5 t, and the span of the bridge is 6 m, while the lifting height is 9,3 m. The crane is mounted on the crane tracks in WR Vukovar in Vukovar.

 

All working movements of the crane: driving the bridge, suspended trolley and lifting/lowering the load, are electrically driven, where the lifting/lowering drive is controlled in two speeds via a frequency converter.

 

The crane is operated from the floor by means of a suspended control button with reduced voltage.

 

A single-girder bridge crane consists of:

  • steel structure, consisting of:
    • main girder derived from HEB profile,
    • end carriages made of rectangular steel pipe,
  • electric driving hoist,
  • electric installations.

 

The electrical equipment of the crane consists of:

  • electric motor of the lifting mechanism with brake,
  • electric motor with brake for driving a hoist,
  • two electric motors with brakes for driving the bridge,
  • control cabinet,
  • limit switches for switching off the lifting/lowering drive, the hoist drive and the bridge drive,
  • suspended control button with reduced voltage,
  • main switches, and
  • power and control cables within the crane itself.

 

At the ends of the crane tracks, steel bumpers were installed as a safety against the crane falling off the tracks. In the same way, the movement of the driving hoist along the main girder is limited.